Search results for: 'fire safety, disaster preparedness and office security'

This course provides the information you need to develop a Disaster Preparedness Plan for your HME business.

To identify ways to promote environmental safety in the health care setting. Every facility should be safe for their patients/residents and staff. This course will review some of the basic elements of environmental safety for long-term care facilities. Key points on the topics of fire safety, hazard communication, lockout/tagout, internal disaster preparedness, and water management are included. U.S. Occupational Safety and Health Administration (OSHA) is the federal agency responsible for oversight of employee safety. The guidelines in this course are based on OSHA regulations.

Patients in health care facilities are especially vulnerable to a fire. Health care staff must be prepared to respond in the event of a fire. This self-study will help health care staff understand the basics of how fires occur and spread and how to prevent fires. Health care staff will increase their skills in recognizing fire hazards, preventing fires, and options for responding appropriately to a fire emergency.

A fire prevention plan (FPP) is a written document required by particular OSHA standards. The purpose of an FPP is to outline major fire hazards and the steps that a company takes to prevent a fire from occurring in the workplace. This course is intended to help safety coordinators develop a fire prevention plan that complies with OSHA standards. (Health care employees should take SAFE030 – Fire Safety instead.)

You should complete “SAFE017 - Developing an Emergency Action Plan” before taking this course, and you should complete this course before taking the “SAFE019 – Managing Fire Extinguisher Systems” course. 

This course covers the use, limitations, and regulatory requirements related to portable fire extinguishers and fixed fire extinguishing systems in the workplace from an employer’s perspective.

This course is designed to be taken in conjunction with:

• SAFE017 – Developing an Emergency Action Plan
• SAFE018 – Developing a Fire Prevention Plan

 Together, these courses provide a comprehensive emergency preparedness development program. You should complete SAFE017 and SAFE018 before taking this course.

This course addresses the concept of document imaging and storage as a method for reducing the overall cost of handling paper in an HME operation.

This course is written for those serving in the required position of the privacy officer. It provides an overview of the job requirements as determined by the Health Insurance Portability and Accountability Act of 1996 (HIPAA).

This course addresses the issues surrounding a home medical equipment company's warehouse. Of primary concern is the proper management of cleanliness, temperature and humidity, pests, security, inventory, equipment processing and employee safety.

An emergency action plan (EAP) is a written document required by particular OSHA standards. The purpose of an EAP is to facilitate and organize employer and employee actions during workplace emergencies. If you are required to have an EAP, this course will guide you through the development of an EAP. Note: This training is intended for safety coordinators and others who may assist in developing an EAP.

The Home Safety Assessment Consultant (HSAC) education course will teach you how to perform professional Home Safety Assessments. People need to modify their homes for many different reasons. The most common would be that a family member is beset with a mobility impairment due to injury, or people in elderhood want to Age in Place and to upgrade their home to reduce fall risks. The HSAC course will teach you to assess the safety hazards of the whole living quarters from driveway to the entrance, and every room on every floor of the home. We provide a Home Assessment guide and evaluation process to follow along with tips on how to educate the consumer on the risks their home has and possible recommended solutions.

The C.E.A.C. and the C.E.A.C. Mastery credentialing programs include course content from The Home Safety Assessment Consultant (HSAC).

This is the second of a two-part series of courses that discusses a wide range of issues related to workplace safety. In this second part, we’ll address procedures to report and investigate accidents and other emergencies; basic safety rules and standards your company should consider adopting; how to handle hazard communication, bloodborne pathogens, safe electrical procedures, and process safety management.

This course contains two articles: one comparing active and passive technologies in sharps safety and the other describing the role of an infection control practitioner (ICP) in managing pharmaceutical waste.

In this first part of the series, we'll address the areas of responsibility for enforcing safety rules within your company; how to identify, analyze and control hazards within your facility; the types of inspections you should be conducting in your workplace; and the type of safety training your company should be offering to your employees.

This course provides an overview of safety data sheets (commonly referred to as SDS and until 2012, MSDS).

This course covers basic safety and component information, center of gravity, and operating hazards. You should complete this course before completing Part 2.

This course provides an introductory overview of OSHA.

This course will discuss current electric hospital bed standards and current regulatory processes in the United States. The course also provides a guide for selecting bariatric hospital beds and implications for future research.

Maintaining a positive, dependable workforce requires dedication from both leaders and team members. Active engagement is key. This course gives leaders the chance to look at who among their team best represents the company and how to increase that commitment across the office, as well as what opportunities and tactics can encourage employees to buy in to a business’s future.

There are no CEUs for this course.

This course is an introduction to oxygen concentrators, oxygen cylinders, liquid oxygen systems and accessories. Because of the multitude of brands of oxygen concentrators and systems on the market, this course will cover oxygen systems, cylinders, accessories, and concentrators in the broadest generic terms.

Using ladders can be hazardous. This course describes the various types of ladders and explains how ladders can be used safely at work and at home. The material for this course is provided courtesy of the American Ladder Institute. Learning objectives: 1. Identify the types of ladders available on the market today; 2. Explain how to use each type of ladder safely; 3. Describe how to properly care for each type of ladder. To successfully complete this course, you must attain a minimum score of 80 percent on the final exam and complete the course training survey. Continuing Education: VGM Education is authorized by IACET to offer 0.1 CEUs for this program.

This course focuses on recognizing common back injury risk factors, understanding how work tasks contribute to strain, and identifying safer alternatives to manual lifting. Emphasis is placed on hazard recognition, use of equipment and assistance, proper task planning, and work practices that support back health and reduce injury risk.

This course focuses on forklift inspection and operation, load handling, and forklift refueling. You should complete Part 1 of this series before completing this course.

The health care administrator will increase their knowledge of corporate compliance and their responsibility to report fraud, waste, and abuse. In health care facilities, all employees are expected to follow certain standards of behavior. These standards should influence the way patient care, daily business, interaction with others, and everyday decisions are accomplished. This course includes information to assist the administrator in developing the facility’s compliance program.The National Continuing Education Review Service (NCERS) of the National Association of Long Term Care Administrator Boards (NAB) has approved the above named program for continuing education credit.

This course is a three-part module about DOT driver’s training.